Sounds right you might try removing and reinserting the dcu to the main board and look for bad solder on the connectors Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "GERALD GANN" <alpha21century1234@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, July 19, 2005 4:01 PM Subject: [TechAssist] Samsung PCN5425R Looks like convergence problem. > Tried this on B list never came through. Samsung PCN5425R Looks like convergence problem. Changed STK's 392-040 still same. When I go into convergence menu I can adjust vertical but not horizontal. I suspect DCU am I on the right track? Thanks > > Jerry > > Alpha 21 Electronics > > Granite City, IL 62040 > > 618-452-8620 > > alpha21century1234@xxxxxxxxxxxxx > > > > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/