[TechAssist] Samsung HLN5065WX/XAA No Picture after Bulb& Ballast replaced
- From: "Tim Poole" <tdp13158@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 15 Sep 2005 21:57:57 -0400
I replaced the bulb and ballast with Philips upgrade and the set came on with
normal picture. I then tried to reset the timer lamp by entering service mode
and the lamp would not start up again no matter how many times I tried. I took
it apart and realized the color wheel was not starting so I manually tried
starting it with no change. I checked voltages to ballast and both 5v and 138v
checked ok. I suspected bad ballast and got another one with same results-
initially starts up then will not come back on after shut down. The customer
said it was very tempermental and would not always come on before the bulb
finally blew. Lamp led blinks then cycles on and off three times with sound
then shuts off. Anyone seen this? Any help would be appreciated. Thanks, Tim
Tim Poole tdp13158@xxxxxxxxxxx
dba A-Mobile TV Shop & Precision TV Service
Fredericktown, Ohio 43019
419-756-3443
740-694-8585
fax 740-694-1032
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
