Fred, There are plenty of affordable Sony universal remotes, less than $10, that will work. Try www.moteva.com support@xxxxxxxxxxxxxxxxxx FAX 717-564-4952 Jeff Dougherty Intrepid Video & Electronics Be careful of your thoughts. 501 Luther Rd They may become your words Harrisburg, PA 17111 any moment. 717-909-8844 VCR tips, electronics info & general interest. www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com www.9-11-2001tragedy.com *********************************************************************** ----- Original Message ----- From: <fremur01@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, December 18, 2002 7:10 PM Subject: [TechAssist] SONY HI FI VCR MDL: SLV-70HF - Config Question Customer says the time (EP 00:00) mark (during tape playback) in the lower right corner of screen is annoying and wants to disable it. I don't see anywhere that this can be changed on the standard vcr panel. I explained to the customer that another remote might need to be purchased. Anyway, do I need the (original)Sony remote to disable this prompt from displaying? This is an old unit and the customer has lost the original remote along with the owners guide. Thanks Item specs: SONY VCR MDL: SLV-70HF Fred MTS Electronics Fayetteville, NC fremur01@xxxxxxxxx __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html