Hello . Is there a service switch on the ctr board? check it. alse check resolder crt board. good luck . Dang TVCR. -----Original Message----- From: fantaj <fantaj@xxxxxxx> To: Fuzz <fantaj@xxxxxxx> Cc: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Wednesday, October 10, 2001 10:52 AM Subject: [TechAssist] RepairWorld Article techsweb.tv69261 >RepairWorld Article techsweb.tv:69261 > Related Items Recent Items Post Followup > Subject: Philips E8 chassis > Date: 10 Oct 2001 02:05:19 -0400 > From: "Garbis" <garofmar@xxxxxxx> > Newsgroups: techsweb.tv > > > Sam's folder 4267 or 4283, E-8 chassis, strange behavior, plays for about >one hour, all voltages, switcher and scan OK , right on the button, set goes >into horizontal shutdown, all scan voltages are out, switcher voltages OK,press >the power button, you get sound, all scan voltages are back, filament is >lit, vertical Ok, screen voltage OK, black screen, raising the screen, vertical >retrace lines, where the scope was showing video input to the CRT socket, >now flat line, but it gets even more interesting, touch any one of the cathode >pins on the crt socket, and you get your video back! Bad Jungle chip, or >maybe bad CRT? Anyone with experience on this jewel? Thanks for any suggestions, >Garbis. > > Related Items Recent Items Post Followup > > >Help make your TechAssist online repair tips >database better! Submit your fixes here: >http://www.circuitwork.com/techassist/tip/#tips >To unsubscribe write to: >techassist-request@xxxxxxxxxxxxx >with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.