Sunny; Sounds like you have not found the bad connection. You did not mention if the video leaves instantly. I presume it will be a dry solder connection. As a last resort....now....some may give me feedback on this, but..in the last 3 months I have fixed really "tough dog" problems by removing the chassis, and using a "HEAT GUN" to heat the underside of the board, in the suspected part of the circuit. Had 2 chassis, one was a Panasonic...never came back. You need to explain this procedure to you customer...and charge accordingly. E.G. Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx ----- Original Message ----- From: "R&S ELECTRONICS" <rselect@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, November 19, 2005 5:03 PM Subject: [TechAssist] RCA TV F27664 CTC 203AX > Hi Techs > Video goes in and out, audio ok. Soldered all coil, L14401, drive > transformer. The board where rca jacks located that board whenever we tap > that board the picture comes on, soldered each and every part but still > the same. > Anybody has any information .... pls let me know. > > Thanks > Sunny > R&S Electronics,PA > TEL:(717)532-6312 > Email:rselect@xxxxxxxxxxxx > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/