Pull out the PIP module and look really close at two SMD resistors (R14127=243 ohms SMD & R14126=392 ohms SMD) for trimming adjustable regulator U18101=LM317=RCA 214704=voltage output it is on steel heatsink to source 3.3V power for PIP IC.One of two SMD resistors has cracked solder joint On 11/19/05, R&S ELECTRONICS <rselect@xxxxxxxxxxxx> wrote: > > Hi Techs > Video goes in and out, audio ok. Soldered all coil, L14401, drive > transformer. The board where rca jacks located that board whenever we tap > that board the picture comes on, soldered each and every part but still the > same. > Anybody has any information .... pls let me know. > > Thanks > Sunny > R&S Electronics,PA > TEL:(717)532-6312 > Email:rselect@xxxxxxxxxxxx > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx > ?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > -- TibsTV Tiberio Moreira 412 Lancaster St. Leominster Ma. 01453 Master Liscence # 9176 978.537.5973 (Fax) 978.840.3516 tiberiom@xxxxxxxxx tibstv@xxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/