Kevin, we just had one that had a static conv problem due to a drop of the brown goo from the spacers in the PIP module falling onto the conv module. Look for milk chocolate colored goo on the conv amp. Leonard Caillouet Electronics World 1261 NW 76 Blvd Gainesville, FL 32606 352-332-5608 FAX 352-332-5668 ----- Original Message ----- From: "Kevin Gunn" <kgunn@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, August 27, 2004 8:25 AM Subject: [TechAssist] RCA P46130WK PTK169PXA *Convergence Problem* > I had this RCA P46130WK chassis PTK169PXA that came in with the complaint of a convergence problem. > When I hook up the video generator the Blue, Red, Green are about 1 inch apart. I have check all components on the convergence board. This appears to be a STATIC convergence problem. I can not remember how to solve the problem of static convergence. > Any tips would be appreciated. > > Kevin Gunn > Star Tek Electronic Services > 390 Springbank Drive > London, Ontario > www.ulurn.com/startek > > N6J 1G9 519-473-6366 > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/