Jim, I don't know if you got your problem solved yet or not? I had a CTC176 that a had a similar problem to yours. The problem ended up being a open trace between jumper JC403 and JC411 in the 12v standby A line, just jumper with a piece of wire to fix. HTH Dan Webster Webster's TV Shullsburg, Wi. ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Friday, August 27, 2004 11:42 AM Subject: [TechAssist] RCA, F31631SE, CTC177CC, snaps, turns black, pix comes back withOSD. > This is happening once every couple of minutes. We repaired the set for > DEAD Lightning damage, then repaired the pincushion circuit, now this. > The picture comes back on with channel number and "stereo" as if it had > been turned off. Any and all ideas welcome. > TIA, > **************************************************************************** *************************************** > Since 1972 > Jim Myers > Telrad Electronics > Fort Wayne, Indiana > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/