[TechAssist] Re: RCA F27201GG (CTC 169CAQS) VERT DEFLECTION?
- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 25 Mar 2004 13:29:15 -0500
Thanks Wayne, it did help turning down screen. This makes me feel better,
spent to much time on this already.
thanks
Bruce.
----- Original Message -----
From: "Wayne Vanaman" <Wayne@xxxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, March 25, 2004 12:17 PM
Subject: [TechAssist] Re: RCA F27201GG (CTC 169CAQS) VERT DEFLECTION?
> Normal operation.
> Vertical is blanked during degauss.
> If this is a "problem" turn the main screen down a lttle.
>
> Wayne Vanaman
> Omega Electronics
> 6904 W Fairfield Dr
> Pensacola, Fl. 32506-3310
>
> Wayne@xxxxxxxxxxxxxxxxxxxxx
> WWW.PensacolaTVRepair.Com
>
> 850-456-5995 voice
> 850-458-6369 fax
>
>
> ----- Original Message -----
> From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, March 25, 2004 10:17 AM
> Subject: [TechAssist] RCA F27201GG (CTC 169CAQS) VERT DEFLECTION?
>
>
> > "Momentary no vert deflection then OK". At start up.
> > I hope some one can shed some light on this problem, At turn on you see
a
> > collapsed vert deflection (about 1\4" deflection) then I hear the relay
> > click an the set comes on full deflection as the CRT heaters lights up
the
> > tube. The regulation is good around 143 volts similar in standby.
> > I did change the cr4118, Q4402 and Q4202. Soldered all board connections
> in
> > Vet circuit. Replaced C403K.
> > I am starting to go around in circles on this set. Trying to figure out
> the
> > theory of operation. I am working off of a CTC169 print but has
different
> > parts than shown in data base. U4501 the vert drive switch shows a drive
> > pulse OK at turn on.
> > . Sorry if my explanation is vague. I also changed the degaussing switch
> > transistor!
> > As soon as I hit the tack switch the vert line shows up, then the relay
> > sounds and the picture comes in ?
> > I don't want to send out this set as is. The original condition was
> > regulator problem which has been repaired , then I noticed this. Should
> not
> > see any kind of visible deflection this soon at turn on?
> >
> > Bruce.
> >
> > B&T Electronics
> > 139 Margaret St
> > Sarnia Ontario
> > Canada
> > N7T 2Y3
> > 519 344 1850
> >
> >
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
