Did you monitor it with your oscilloscope?? Ringing? Wider than 12uS?? Damon Brunger ----- Original Message ----- From: "Max Bonnell" <mebonnell@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, June 10, 2004 8:05 PM Subject: [TechAssist] Re: RCA CTC187CJ3 | Well I did fire it up and it lasted less than 5 minutes. Another HOT | shorted. | | Oh well back to the drawing board. | | Thanks Jim for the file. | | Max Bonnell | Bonnell TV | Robinson, IL | | | | Sender: techassist-bounce@xxxxxxxxxxxxx From: | jstielau@xxxxxxxx(Shoreline=A0Electronics) Date: Thu, Jun 10, 2004, | 3:16pm (CDT+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: | RCA CTC187CJ3 Reply=A0to: techassist@xxxxxxxxxxxxx | | Sounds reasonable for that circuit..........fire it up!!! | | Jeff Stielau | Shoreline Electronics Repair | 344 East Main Street | Clinton,CT 06413 | (860)399-1861 | (860)664-3535 FAX | jstielau@xxxxxxxx | | ----- Original Message ----- | From: "Max Bonnell" <mebonnell@xxxxxxxxx> | To: <techassist@xxxxxxxxxxxxx> | Sent: Thursday, June 10, 2004 2:30 PM | Subject: [TechAssist] Re: RCA CTC187CJ3 | | Thanks Jim. Send it to mbonnell@shawneelink,net. | | The model is F32672SB. | | Also thanks to Phil, Bob & Jeff for your replys. | | Problem is: I repaired the set last month by replacing the HOT (BUH517) | and found nothing else wrong & sent it home. I got it back with the HOT | shorted, then replaced it and found a bad connection on T4301. Measuring | from ground to the collector on the HOT reads about 20K ohms. Is that | normal? | | Max Bonnell | Bonnell TV | Robinson, IL | Sender: techassist-bounce@xxxxxxxxxxxxx | | From: | jr.myers@xxxxxxxxxxx(Jim=3DA0Myers) Date: Thu, Jun 10, 2004, 12:02pm To: | techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: RCA CTC187CJ3 | Reply=3DA0to: techassist@xxxxxxxxxxxxx | | That is a somewhat rare version of the CTC187 chassis I think, | PartsFinder shows it was used in only two models. PartsFinder shows the | service manual is on the Jan 1, 1998 CD ROM which did not come with a | subscription and I don't have it. There is a zip file for CTC187CL3 that | I can send to you on the chance it may help if you want. Let me know if | and where to send it. | ********************************************** | Since 1972 | Jim Myers | Telrad Electronics | Fort Wayne, Indiana | Max Bonnell wrote: | | Millions of TV's out there. | Am I the only tech with a RCA CTC187CJ3? | | Max Bonnell | Bonnell TV | Robinson, IL | | Sender: techassist-bounce@xxxxxxxxxxxxx From: | mebonnell@xxxxxxxxx(Max=3D3DA0Bonnell) Date: Wed, Jun 9, 2004, 1:50pm To: | techassist@xxxxxxxxxxxxx Subject: [TechAssist] RCA CTC187CJ3 | Reply=3D3DA0to:=3D | techassist@xxxxxxxxxxxxx | | I am using a sams for CTC187AB to work on the CJ3 chassis. I have found | the hi voltage section to be different. Could someone send me the hi | voltage section. I can open jpeg and gif on webtv. | If it is pdf send it to | mbonnell@xxxxxxxxxxxxxxxx | | Thanks guys and have a good day. | | Max Bonnell | Bonnell TV | Robinson, IL | Ph. & Fax 618-544-7193 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/