Whenever I'm in that area where there's a chance I can bump or move convergence rings, I always mark the rings with whiteout or bright marker.It only takes 10 seconds to mark all three and I've wasted too much time reconverging on what was good from the start. Jonas Miglinas Miglinas TV Chicago ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, March 09, 2003 10:21 AM Subject: [TechAssist] RCA CTC169 > This unit I replaced splitter and caps in power supply, took it back and the convergence was all out of whack. Convergence settings move very well but I couldn't get them to line up with the green.Customer said he had perfect picture when it went dead ( the usual comment ). So as the convergence controls were working I moved the rings on the tubes to converge the screen. My question is did I miss something or were the rings moved from the beginning? Looks good now. I set the convergence settings to center and lined them up with the green. > al marquardt > ampm@xxxxxxx > > > **************************************************************************** * > Submit A Repair Tip Here, or Change/Remove your Email Address: > http://www.tech-assist.org/secure/tip/main.html > **************************************************************************** * > For automatic password retrieval 24 hours a day, go to: > http://www.tech-assist.org and select "Lost your Login Info?". > **************************************************************************** * ***************************************************************************** Submit A Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html ***************************************************************************** For automatic password retrieval 24 hours a day, go to: http://www.tech-assist.org and select "Lost your Login Info?". *****************************************************************************