Hi I had one vertical dog on a ctc169 that ended up as capacitor C4521 a .0082 on pin 3 of ic to ground. Hope this helps you Ken Loney ----- Original Message ----- From: <AlHelmetag@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, May 29, 2002 7:11 AM Subject: [TechAssist] ProScan with no Vert. Oscillation > Sorry did not mention model or chassis number on this one. > ProScan Model: PS27113/Chassis:CTC169CL5. > Pix collapses into 1/2 inch wide horizontal band. Not familiar with vertical > circuitry in this unit. I do not have a service manual on this 10 year old > set. Most caps test "compare" range. Help in locating the specific cap > locations would help. > Any help much appreciated. > Alex > Alhelmetag@xxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/