Check R266 for increase in reisitance, should be 160k, will probably read around 200k and causes erratic shutdown. also dont forget to put half a roll of solder on the board for good measure. Tony Saracco TCS ELECTRONICS 406 Andra Ct. Gilberts, IL 60136 tcselectronics@xxxxxxxxx ----- Original Message ----- From: "Jim Myers" <jr.myers@xxxxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, March 03, 2004 9:15 AM Subject: [TechAssist] Pioneer PTV SD-P5057, shuts down after 4-5 hours No correct schematic on this but do have a close one. Any tips on this problem. When it shuts down it must be unplugged and reconnected to reset before it will power up again. ---------------------------------------------------------------------------- - Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/