[TechAssist] Philips/Mag 9P6040c101 chassis PTV843 int size change H & V
- From: "Leonard Caillouet" <lcaillo@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 31 Aug 2004 18:27:24 -0400
Philips/Mag 9P6040c101 chassis PTV843 int size change H & VNo data found in
the archives, tips, nor download area. This one comes on
and when cold the B+ is about 90v, then after warm-up it goes up.
Curiously, the focus is better when it is low and the pix shrunk. Need some
infor on this one regarding the power supply (what should B+ be) and how to
touch up the convergence.
I can adjust the b+ but it never goes above 110v. I suspect a problem in
the regulator control circuit, but would like to get a look at the schematic
b/f getting into it very far.
Anyone have a manual on it?
Thanks.
Leonard G. Caillouet
Electronics World
Gainesville, FL
352-332-5608
352-332-5668 (fax)
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
