[TechAssist] Re: Philips 27F800-7583 Part ID help

  • From: "Shoreline Electronics" <jstielau@xxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Thu, 15 Sep 2005 10:16:02 -0400

---------------------------------------------------------------
Text pasted from WinSTIPS 2.0
http://www.ServiceSoftware.com
---------------------------------------------------------------

PHILIPS   F8

Shutdown On Power Up

Bryn Mawr Tv

Defective Vertical Ic Ref 7401  (Stv9379fa) Nap# 932212147687
Note Generic W/O Fa Suffix Will Not Work

---------------------------------------------------------------

PHILIPS   F8

Shutdown. Turns On Then Goes Off

Consumer Service

R3485 4.7 Ohm

---------------------------------------------------------------

PHILIPS   F8

Shuts Down At Turn After Vert Repair

Palmetto Electronics, Inc.

Resistor 3409 1.5 Ohm (4835 116 57664) & 3488 4.7 Ohm (4835 110 47023)

---------------------------------------------------------------

PHILIPS   F8

Shuts Down At Turn On, Keep Turning On To See No Vertical Deflection.

Ford's Tv & Video Service

Resistor, 3488 (4.7 Ohm), Was Never Soldered On One End At Factory, 50 Volt 
Supply To Vertical Output Ic, 7401.

---------------------------------------------------------------



=================================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
(860)399-1861
(860)664-3535 FAX
jstielau@xxxxxxxx
=================================
----- Original Message ----- 
From: <cgriff4000@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, September 15, 2005 10:03 AM
Subject: [TechAssist] Philips 27F800-7583 Part ID help


>          I have a Philips C#27F800 7583  M#PL9127 C101. This unit comes up 
> with no vertical then shuts down in 5 seconds. This unit was obviously 
> worked on before, R3487 and R3488 had been replaced each with a set of 10 
> ohm resistors in parallel. I will assume someone was trying to make 5 ohm 
> resistors. What should these 2 resistors be, 4.7 ohms? Also, the vertical 
> IC was replaced and I can't read the markings. What should this be? Can I 
> use an NTE1788 in this model. Any other tips on this vertical circuit 
> would be helpful, I have a feeling I'm gonna need the help.
>
> Thank you,
> Chad
> Griffiths TV/VCR
> Schenectady, NY
>
> -----------------------------------------------------------------------------
> This Email List is accessible to the general public through search 
> engines. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation 
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
> 

-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines. 
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/

Other related posts: