Mando, Besides what you have replaced, check/replace the following: R445, 1 ohm D445 R420, 1 ohm Also, found a note to check C447, 1000@16v, to prevent failure of the vertical output IC. HTH Ken Smith Gulf Technical Services 3034 Gulf Breeze Parkway Gulf Breeze, FL 32563 850-934-8324 (Voice) 850-932-0819 (Fax) On Thu, 11 Mar 2004 13:55:08 -0700 armando guerra <birdie@xxxxxxxxxxxxx> writes: > This set when powered on,would try to start but go into shutdn.I > replaced the vertical ic TDA-9302h,D 409 (used nte 580) R420=1 > ohm,and > C557 =100\50v lytic.Now when I power the tv on,tv comes on but has > just > a line across screen (no vertical defflection).I have the manual for > the > F8 chasis but not for this B8.They are different.The +13v and the > -13V > at the ic are there.I had a known good used yoke,subbed it and made > no > difference. Can someone with the B8 chasis manual send me a print of > the vertical ckt so that I troubleshoot this problem .Any tips ir > idea's > would also be apreciated. Thanks. > Mando > Birdie's TV & Electronics > Casa GRande, AZ > PS I made sure that the traces to the ic are ok.I have seen some > come > apart when unsoldering the ic.Also the traces to D409. > > > ------------------------------------------------------------------------- ---- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ________________________________________________________________ The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today! ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/