Ken, Had one with the same problem, only it was a ch.#AEDC242, R808 (1.8m) fixed the problem, it was open. I'd recheck R808 and make sure its OK. Dan Webster Webster's TV Shullsburg, Wi. ----- Original Message ----- From: K Dinckan <kdinckan@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, July 22, 2002 11:26 PM Subject: [TechAssist] Panasonic tv CT-27G20T ChassisAEDP246 No B+ > Hi All > Set came in with shorted Regulator IC, STK730-020 and open R808. Replaced both and now I get 150V on pin 11and 12 but no voltages on the other pins. Checked all the components around the regulator they all check good. > Anyone have any extra info so I can apply to this set. > Thanks in advance > Ken Dinckan > > e-mail to : kdinckan@xxxxxxx > > All TV&Appliance Service > 2747 Roosevelt Street # B > Carlsbad CA 92008 > Tel:(760)4341131 > Fax:(760)4348856 > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/