Make : Panasonic Model : PVDM2799 27" Combo with VCR & DVD Problem : Customer was fast forwarding a tape and it power off in mid Fast Forward. Set is dead now except for flashing timer light. Pressing power does nothing. Even tried a tip on unlock mode (Press Power & FF for a few seconds) We disassembled the vcr section & removed the tape. Checked all the fusible links....all seems OK. VCR supplies seems to be up & running OK. This unit has another supply for the DVD circuitry but difficult to tell what supply is the main standby as both are fed A/C in standby mode. Does anyone have a PDF of the standby/control circuitry on this model or a tips that may apply ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ========================== "If you push something hard enough it will fall over." Fudd's First Law of Opposition - Sir Sidney Fudd ***************************************************************************** Submit A Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html ***************************************************************************** For automatic password retrieval 24 hours a day, go to: http://www.tech-assist.org and select "Lost your Login Info?". *****************************************************************************