Looking at schematic for CT-35G24A the 12 volt standby goes to pin 8 of the EEPROM and to pins 61 and 22 of the micro after L001. Also C008 at pin 8 of eeprom, C011 at pin 61 of micro and C020 at pin 22 of micro could short. ******************************************************************************************************************* Since 1972 Jim Myers Telrad Electronics Fort Wayne, Indiana Larry E wrote: > Hi Guys, Have a CT-35G25B, Chassis DP332 that has a dead short on the > 12v line, R005 was running hot, checked Q002 it`s good, pulled L001 and > short is gone, re-inserted L001, pulled L006, C010, C011, C020, and > still > have the short, looking like a bad micro but thought I would ask the > list > before shotgunning an expensive part on a wild a** guess. Thanks in > advance > > Larry Eastman > American TV & Electronics > Crystal River, Fl. 34428 > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/