[TechAssist] Re: PIP no Color
- From: Jack <lightwizard_2000@xxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Wed, 16 Jan 2002 20:11:08 -0800 (PST)
Clean the board by brushing it with MEK. Good solvent
for the fish cap jiz. There is usually one trace that
is open... I can't remember the location, but it's off
one of the caps.
Jack
--- Electric Medic <info@xxxxxxxxxxxxxxxxx> wrote:
>
> Bad PIP module. I know this is generic, but we have
> test ones that we plug
> in to eliminate the PIP. On those it is normally bad
> fish caps, C7001 causes
> no video. I would check them all for leaks, and
> replace as necessary. If the
> flat pack IC is corroded, it probably is bad, in
> which case you will have to
> replace the PIP module. If you repair that module,
> be sure to change all
> leaky caps, or it will recall. The modules are
> still available, but not
> from Mitsubishi.
>
> Perry Bower
> Electric Medic
> "It's Cheaper to Keep Her"
> 3850 Washington Road Suite 5b
> Martinez, Georgia 30907
> Phone: 706-8MEDIC4 (863-3424)
> Phone: 706-863-3474
> Fax: 706-863-2316
> Website: www.electricmedic.com
> mailto:info@xxxxxxxxxxxxxxxxx
> "WE REPAIR WITH CARE"
> More Info:
>
www.augusta-ga.bbb.org/report.html?compid=6001278&national=y
>
> Factory Trained Authorized Service Center For:
> Fisher, GE, KEC/KTV, Konka,
> Mitsubishi, Panasonic, Philips Magnavox, Pioneer,
> ProSCAN, RCA, Samsung,
> Sanyo, Sharp, SONY, Technics, Zenith
>
> Provide Extended care for: AON, Circuit City, GE
> Contracts, Glass Agency,
> Philips Contracts, NEW, Rex
>
>
> -----Original Message-----
> From: techassist-bounce@xxxxxxxxxxxxx
> [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of
> J Silverman
> Sent: Wednesday, January 16, 2002 9:07 PM
> To: techassist@xxxxxxxxxxxxx
> Subject: [TechAssist] Re: PIP no Color
>
>
>
> Most of the posts I have seen on PIP problems were
> fixed by replacing the
> surface-mount electrolytics.
> Jerry Silverman
> Greentron Inc
> 4 Newland Ave
> Greenville SC 29609
> 864 232 3889
> Fax 271 2080
> mailto:greentron@xxxxxxx
> ----- Original Message -----
> From: "ACT Electronic Center" <act@xxxxxxxxxxx>
> To: "Tech Assist" <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, January 16, 2002 8:12 PM
> Subject: [TechAssist] PIP no Color
>
>
> > Can anybody suggest a tip for this kind of
> trouble?
> >
> > PIP no color. Mitsubishi CS-40601
> >
> > thanks in advance
> >
> > Dennis Co
> > act@xxxxxxxxxxx
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> >
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
=====
Electronic Wizards
535 North Woodlawn
Suite 350
Wichita, Kansas 67208
316-686-8324
316-686-4815 fax
__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
