[TechAssist] Re: P46732BA
- From: "tvservice" <tvservice@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 27 Sep 2004 15:07:27 -0500
It should be installed
maybe stuck to your solder wick when removed C4108
it's happend to me when careless in dark rooms.
just put one in or you may be loosing Q4101 chopper
Robert
tvservice@xxxxxxxxxxxxx
H & H Electronics Inc
----- Original Message -----
From: "Barry Thompson" <barrystv@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, September 26, 2004 9:36 PM
Subject: [TechAssist] Re: P46732BA
> Hi Jeff : The chassis a RCA CTC 169 PG Proj. The part in question is C4151
> 1000 pf surface mount in the chopper supply. I replaced the 4 caps and
> regulator ic and chopper output.3 volt zener diode surge 15 watt resister
> fuse and of course cr 4118.I noticed that C4151 was missing.I need someone
> that has the exact drawing for this chassis to verify if it was used.
Thanks
> Barry
> barrystv@xxxxxxx
> Barrys TV
> Ottawa Canada
>
> ----- Original Message -----
> From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Sunday, September 26, 2004 9:02 PM
> Subject: [TechAssist] Re: P46732BA
>
>
> > You're going to have to give more information than this.
> > Chassis number..looks like an RCA model..
> > RCA's I have seen have 4-5 digits for location numbers.
> > Every thing is shorted? I doubt it...you have us trying to guess to much
> > because you don't supply enough
> > details.
> > This is getting to be a waste of time. So many people quickly typing
their
> > posts, not including enough
> > information, then three more posts requesting more information, then
> > people get pissed because no one
> > replies to their emails.
> > Techs have to remember, WE are not in your shops, so you need to be our
> > eyes, if you want information that
> > will help.
> > Jeff
> > --
> > Intrepid Video TV/VCR Repair
> > 263 S Front St, Steelton PA 17113
> > 717-939-7708; (F) 717-564-4952
> > www.intrepid-video.com www.tech-repair.net
> > ----- Original Message -----
> > From: "Barry Thompson" <barrystv@xxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Friday, September 24, 2004 3:33 PM
> > Subject: [TechAssist] P46732BA
> >
> >
> > Hi: I noticed that C151 1000pf across the 3 volt zener and the 69pf was
> > missing from the factory in the power supply. Did they leave this one
out
> > on
> > some of them? Every thing is shorted on this one Thanks Barry
> > Barrys TV
> > barrystv@xxxxxxx
> > barrystv33@xxxxxxxxxxx 20meg attachments
> > Ottawa,Canada
> >
> >
>
> --------------------------------------------------------------------------
---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
> >
> >
>
> --------------------------------------------------------------------------
---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
