Hi all, I'm working on an Orion STV2750 television. Originally had a shorted HOT and R440 (2.7K 5w), which supplies voltage to the driver transformer, had increased to 3.6k ohms. Replaced with original parts, and now the set will run with a great picture, but after a few minutes, when I touch the heatsink that the HOT is mounted on it is very warm. It seems much warmer than other brands of TVs. I've checked the waveforms at the HOT and they are OK with no extra ringing or distortion. There is a regulator mounted on the other side of this heatsink, and I am wondering of these two parts together are causing this heat. Does anybody have any experience with these newer Orion TVs? Thanks in advance, Corey Brazell Audio Video Electronics 12169 SC Hwy 121 Newberry SC 29108 ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.