[TechAssist] Re: Nikko nvr 4500 model. (Cross to Goldstar number?)
- From: Gary McCartney <gary@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 24 Feb 2004 15:18:34 -0500
Jeff, you are thinking of the little clutch lever that gets the broken
tab. This is a different lever which is situated over by the mode switch
under the cam gear.
Gary McCartney
McCartney Electronics
Guelph Ontario Canada
Est. 1984
email: gary (at) number63.ca
Intrepid Video Support wrote:
>
> On these levers, the spring is to sit in a slot. This little tab breaks
> allowing the spring to be free and
> the lever to float freely.
> The clicking sound is the loose spring contacting the clutch gear..or T/U
> reel, I believe...been a while..
>
> Jeff Dougherty
> Intrepid Video TV/VCR
> 263 S Front St
> Steelton PA 17113
> fax...717-564-4952
> www.intrepid-video.com www.tech-repair.net
>
> ----- Original Message -----
> From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, February 24, 2004 9:54 AM
> Subject: [TechAssist] Re: Nikko nvr 4500 model. (Cross to Goldstar number?)
>
> OK thanks Gary. Funny I removed that little spring in the lever and
> stretched it and put back. It did not make a difference, wonder if the
> plastic becomes to flexible.
> thanks will order one and give it a try.
> Bruce.
>
> ----- Original Message -----
> From: "Gary McCartney" <gary@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, February 24, 2004 2:31 AM
> Subject: [TechAssist] Re: Nikko nvr 4500 model. (Cross to Goldstar number?)
>
> > Bruce, I believe that to be a Goldstar D07 deck in that VCR. For REW
> > problems, I always replace the 333-208A lever you mentioned. Can't
> > remember if that lever affected FF or not. If you want the (usually)
> > blue cam gear, it is number 374-005A or Zenith number 928-00129. If you
> > want the metal arm gear that engages the supply and take up guides, it
> > is number 435-291A or Zenith 834-341. The metal gear near the mode
> > switch that meshes with the carriage basket assembly is 435-318A.
> >
> > I don't have a cross for a Nikko NVR4500, but a Nikko NVR3500 is very
> > similar or possibly the same as a Goldstar R-G10M.
> >
> >
> >
> >
> > Gary McCartney
> >
> > McCartney Electronics
> > Guelph Ontario Canada
> > Est. 1984
> > email: gary (at) number63.ca
> >
> >
> >
> >
> >
> >
> >
> >
> > Bruce Tiedeman wrote:
> > >
> > > Does any one on the list have a cross or information on this model. I am
> > > looking for the" gear", and "lever", location is at mode switch".This
> vcr
> > > has a FF&RW problem. I used to have these numbers at one time. The lever
> #
> > > 333-208A is one in question, I think. I don't know the matching gear
> number.
> > > thanks for any help,
> > > Bruce.
> > >
> > > B&T Electronics
> > > 139 Margaret St
> > > Sarnia Ontario
> > > Canada
> > > N7T 2Y3
> > > 519 344 1850
> > >
> >
> > --------------------------------------------------------------------------
> ---
> > > Lost Password:
> > > http://www.tech-assist.org and select "Login Problems?".
> > > Email Archives:
> > > //www.freelists.org/archives/techassist/
> >
> > --
> >
> >
> > --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
> -----------------------------------------------------------------------------
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
--
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
