[TechAssist] Re: Mitsubishi model CS-35301
- From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 2 May 2002 09:59:57 -0500
Is there a PIP module? ESR the caps on the pip module and replace anywhere
from 2 to 16 of them or bypass the PIP module. Search the archives or the
members area tips for how to bypass.
Jim Myers
Telrad Electronic Services Co.
Fort Wayne, IN 46815
jr.myers@xxxxxxxxxxx
260-432-4486 Fax and Voice
Fax is always on
----- Original Message -----
From: <Ttkirkpat@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, May 02, 2002 9:32 AM
Subject: [TechAssist] Mitsubishi model CS-35301
This set rolls for the first 5 minutes. The picture is not mis-shaped at all
and will stabilize on its own after about 5 minutes. Their are no loose
connections and it does not matter if you use the tuner or external inputs.
Anyone seen this puppy? Thanks from Mike Video Center ttkirkpat@xxxxxxx
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
