If this set has the power supply bd separate from the main chasis,on that bd, check or replace C920=10\250v.Also,go ahead and esr all other caps in that bd.They are a common failure after a few yrs. Mando Birdie's TV & Electronics Casa GRande, az birdie@xxxxxxxxxxxxx Ron Price wrote: > This Mitsubishi VS-5007R V11B Chassis system came in with no power up. Can > hear relays clicking. Checked HOT and HV Regulator. Found both to be bad. > Changed both out with original part numbers and still no power up. Any help > would appreciated. > > Ronald J. Price Service Tech. Terry's Computer Shack 719 Washington P. O. > Box655 Mendota, Il. 61342 Phone: 815-539-3210 Fax: 815-539-7521 Email: > ron_tcshack@xxxxxxxxxxx > > ---------------------------------------------------------------------------- > Chat with friends online, try MSN Messenger: Click Here[1] > > --- Links --- > 1 'http://g.msn.com/1HM1ENUS/c144??PS=47575' > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/