John something here to check out..Eric MITSUBISHI VZ4 Excessive brightness. Check for 9VDC at pin 7 of IC200. If low, replace IC203 (#270P210010) John Mielke wrote: >I have a Mitsubishi VS45501, chassis VZ4 made in 1997 that has a dim picture >that is too bright. It does not have retrace and does not shutdown. The >customer said the problem started gradually. I have replaced IC200 >(CXA2095S) per winstips and checked all the electrolytics and transistors >around that IC. The brightness and contrast controls change the OSD bars >but there is no change in the picture. Color and tint controls work >normally. I removed the PIP module and the picture is still bright, of >course with no video, and the OSD is still dim. Has anyone seen this >before? TIA, John. >John Mielke >Main TV >636 Main St >Longmont, Co 80501 >303 776 6955 >303 776 0792 fax >www.longmontmaintv.com >maintv2004@xxxxxxxxxxx >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search engines. >Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ > > > > -- Eric E M Electronics 59 Wights Rd Deer Lake NL Canada A8A 2J2 Ph# 709 635 2627 tvman@xxxxxxxxxxxxxxx eric.manuel@xxxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/