[TechAssist] Re: Mitsubishi Model # CS-35601/ vertical jitter,roll

  • From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Mon, 13 Sep 2004 07:00:01 -0400

I have NEVER sent one out. I always repair them and it only takes about a
half hour or so. Need I say more?

Bob Waterman, CET® #RI-28
Master Technician License #9109
Service Manager / Parts Manager
Gemini Computer, TV, & Security Alarms
(508)695-7302
(508)695-7769 FAX
geminitv@xxxxxxxxxxx
geminitv@xxxxxxx
www.geminicomputertvsecurityalarms.com


----- Original Message ----- 
From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
To: "Techassist" <techassist@xxxxxxxxxxxxx>
Sent: Friday, September 10, 2004 11:04 PM
Subject: [TechAssist] Re: Mitsubishi Model # CS-35601/ vertical jitter,roll


> Bob,
> Have you had luck repairing these? The ones I have seen look like they
have a lot of electrolyte damage.
> I would think it is better to have PTS rebuild and get their warranty..
> If course, if they are pretty easy, I'd rather do it myself and pocket
that $150.
> How do you feel?
> Jeff
> --
> Intrepid Video TV/VCR Repair
> 263 S Front St, Steelton PA 17113
> 717-939-7708; (F) 717-564-4952
> www.intrepid-video.com  www.tech-repair.net
> ----- Original Message ----- 
> From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, September 09, 2004 7:14 PM
> Subject: [TechAssist] Re: Mitsubishi Model # CS-35601/ vertical
jitter,roll
>
>
> How about repairing the PIP module?
>
> Bob Waterman, CET® #RI-28
> Master Technician License #9109
> Service Manager / Parts Manager
> Gemini Computer, TV, & Security Alarms
> (508)695-7302
> (508)695-7769 FAX
> geminitv@xxxxxxxxxxx
> geminitv@xxxxxxx
> www.geminicomputertvsecurityalarms.com
>
>
> ----- Original Message ----- 
> From: "armando guerra" <birdie@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, September 09, 2004 7:02 PM
> Subject: [TechAssist] Mitsubishi Model # CS-35601/ vertical jitter,roll
>
>
> > I have a call on this tv tomorrow (Friday).The complaint is that the pix
> > has vertical jitter and or may roll sometimes.She say's that its
> > connected to cable system and that it does this on mostly all channels
> > but more on the higher channels.It sounds to me like the popular pip
> > module needing the lytics. I can't find any notes on this model so I
> > would like to know if I can bypass the pip module like on other
> > models,using 2 -  4.7/50v caps on the VP connector pins 11,5,9,and
> > 7.Just want to verify that it can be by-passed.Thanks for your response
> > and help.
> > Mando
> > Birdie's TV & Electronics
> > Casa  Grande, AZ
> >
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 09-2004