Ed. Have you checked the safety caps from the collector of the HOT to ground? Max Bonnell Bonnell TV Robinson, IL Sender: techassist-bounce@xxxxxxxxxxxxx From: teltek3@xxxxxxxxxxxx(Tel-Tek=A0Electronics) Date: Fri, Aug 6, 2004, 2:25pm (CDT+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Mitsubishi CS-2723R Picture too wide. Reply=A0to: techassist@xxxxxxxxxxxxx This set came in "Dead". Horizontal was shorted, change numerous caps in the regulator circuit. Set now works, but picture is a little stretched horizontally. Not bowing, but just too wide. He said he had this problem quite a while before it went dead. =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0Anything for excessive width on these that I may have missed? TIA -Ed- Tel-Tek Electronics teltek3@xxxxxxxxxxxx Ontario-Canada ---------------------------------------------- ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/