Anodes are siliconed. You have to break the seal, and re-insulate when installation is completed, And you are right....not an easy procedure. -Ed- Tel-Tek Electronics Midland, Ont. Canada. teltek2@xxxxxxxxxxxx "Quality will be remembered, long after Price is forgotten" ----- Original Message ----- From: "tomlee" <t8872695@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, May 09, 2002 4:39 PM Subject: [TechAssist] Re: Mit VS-5041 Hot keeps blowing > > Hello. > If I disconnect the anode With the horizontal and vertical yoke hook up > Hot run good. no yoke burn. I did not check how high is High voltage. > It seem to me a hard work to replace tube. One time experience with > sony tube repalcement.But this Mit I have never do before look like anode > connection is tough. any help is appricated. > Dang > www.tvcrcomputers.com > -----Original Message----- > From: Ron Miller <rlmbkm@xxxxxxxx> > To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> > Date: Thursday, May 09, 2002 10:46 AM > Subject: [TechAssist] Re: Mit VS-5041 Hot keeps blowing > > > > > >Is the HV to high,burnt yoke? > >Country TV > >Ron Miller > >484 FM444 S. > >Inez,TX 77968-5002 > >V.(361)782-6419. F.(361)782-9149 > > > >----- Original Message ----- > >From: "Tel-Tek Electronics" <teltek2@xxxxxxxxxxxx> > >To: <techassist@xxxxxxxxxxxxx> > >Sent: Thursday, May 09, 2002 12:23 PM > >Subject: [TechAssist] Re: Mit VS-5041 Hot keeps blowing > > > > > >> > >> Check with your customer, he may know something about it, but probably > >won't > >> admit it. > >> > >> -Ed- > >> Tel-Tek Electronics > >> Midland, Ont. Canada. > >> teltek2@xxxxxxxxxxxx > >> > >> "Quality will be remembered, long after Price is forgotten" > >> ----- Original Message ----- > >> From: "tomlee" <t8872695@xxxxxxxxxxxxx> > >> To: <techassist@xxxxxxxxxxxxx> > >> Sent: Thursday, May 09, 2002 11:54 AM > >> Subject: [TechAssist] Mit VS-5041 Hot keeps blowing > >> > >> > >> > Hello freiends. > >> > I am working with this bigscreen. VS-5041. Hot and fuse keeps blowing. > >> searching for bad component I find out the red tube has neck broken.have > >> never seen this problem why tube broken without phisical impact. Does any > >> have experience in > >> > changing the tube ? I am willing to buy a red tube for it with a fair > >> price. does any have it in the boneyard. > >> > Dang > >> > TD electronics > >> > 18546 sherman way > >> > reseda , ca 91335 > >> > www.tvcrcomputers.com > >> > > >> > ------------------------------------------ > >> > To REMOVE your email address, click here: > >> > http://www.tech-assist.org/unsubb.html > >> > ------------------------------------------ > >> > ***NEW*** Tips Added Instantly!!!*** > >> > Submit Repair Tips here: > >> > http://www.tech-assist.org/secure/tip/ > >> > >> ------------------------------------------ > >> To REMOVE your email address, click here: > >> http://www.tech-assist.org/unsubb.html > >> ------------------------------------------ > >> ***NEW*** Tips Added Instantly!!!*** > >> Submit Repair Tips here: > >> http://www.tech-assist.org/secure/tip/ > >> > >> > >> > > > >------------------------------------------ > >To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > >------------------------------------------ > >***NEW*** Tips Added Instantly!!!*** > >Submit Repair Tips here: > >http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/