Service manual coming at ya via www.yousendit.com And yes.....if I recall there should be a horizontally mounted board piggybacked on top of the signal board. The board is about 5" square and has several large surface mounted IC's on it. ========================== Jeff Stielau Shoreline Electronics Repair 344 East Main Street Clinton,CT 06413 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ======================== ----- Original Message ----- From: "Ron Miller d.b.a. Country TV" <rlmbkm@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, October 22, 2005 12:42 PM Subject: [TechAssist] Missing PCB? Panasonic ct-36hl43g AP410 > Came in from other shop, dead. > Have standby 9 and 16 volts only no relay click or lights. > In the center of the signal pcb (left side tech view) are 3 PC mounted > connectors A21-A22 & A23 also two stand-offs. Is this unit missing a > board? > No SM need info and part #. > Note: unit does have DVI pcb and SMPS pcb also delf. TIA > > Country TV > Ron Miller > Inez, TX. 77968 > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/