[TechAssist] Re: Magnavox RS2568 chasis 25y105 no Video

I've seen PS problems cause strange video problems in
some of these Philips sets. C432 can cause a no Sync
condition.
At Q400 Emitter should be app. 130V...
Try the A/V inputs...
Check for the 200v at the R,G,B outputs on the CRT PCB...

Peggs

At 02:35 PM 7/29/02 -0400, adam miller wrote:
>
>
>Hello,
>
>I have a Magnavox 25" television that has sound but no picture, the OSD will 
>display the channel number, and if you crank up the rastor you can see the 
>retrace lines, checked voltages, look normal, i dont have a service manual 
>for this one. It almost looks as though the video signal is muted somewhere. 
>any suggestions?
>
>Troy Miller\
>Riteway Computers
>
>
>_________________________________________________________________
>Chat with friends online, try MSN Messenger: http://messenger.msn.com
>
>------------------------------------------
>To REMOVE your email address, click here:
>  http://www.tech-assist.org/unsubb.html
>To CHANGE your email address, click here:
>  http://www.tech-assist.org/change.html
>------------------------------------------
>***NEW*** Tips Added Instantly!!!***
>Submit Repair Tips here: 
>http://www.tech-assist.org/secure/tip/
>
Peggs' Electronics
1519 West 2nd Street
Owensboro,KY 42301
------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here: 
http://www.tech-assist.org/secure/tip/

Other related posts: