Maybe you could let it detect then take the disc out. To do this you have to take the top spindle off. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Mouton's Electronics" <moutons@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, August 11, 2004 12:54 PM Subject: [TechAssist] Magnavox M# DVDR985/171 DVD burner says no disc > Fellow Techs, > This DVD burner (stand alone unit) is the first I have ever seen in for repair. I put in a regular DVD and it will not read it. It just says no disc. I removed the cover to the cd tray and the laser doesn't light up. I know on many cd/dvd players usually the laser will light up to see if a disc is in the tray but this laser has what looks like a IR sensor similar to a vcr tape count sensor next to it. Does anyone know what it is or if that is what it is for does the laser not light up until the sensor detects a cd? > > I checked all of the supplies to the DVD drive assembly and they are present. > > Any suggestions on how to trouble shoot this problem would be greatly appreciated. > > > Jason > Mouton Electronics > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/