Check for vented green colored caps in the power supply. C934 1000uf @ 10 V if your model has it Keith Trumbla BEMelectronics.com Suite 212-530 Century St. Winnipeg Canada R3H 0Y4 Ph.204.775.2875 Fax.204.774-9192 ----- Original Message ----- From: "Gary McCartney" <gary@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 02, 2004 8:38 AM Subject: [TechAssist] Re: JVC XV-S60 DVD player, won't eject tray > > No DVD expert but I did have a Kenwood DVD player that displayed "hello" > and wouldn't do much else. Problem was the 27 Mhz crystal on the micro > controller board. As soon as I touched the crystal lead with my > frequency counter probe, the unit started functioning properly, then > intermittant after that until I replaced the crystal. > > > > > Gary McCartney > > McCartney Electronics > Guelph Ontario Canada > Est. 1984 > email: gary (at) number63.ca > > > > > > > > > Kevin wrote: > > > > When this DVD player is turned on it says "Hello" like it is supposed to > > and then it displays "Loading" on the display and does nothing else. > > The tray will not eject and using the reset procedure for this model > > does not bring up "Test" on the display. Any DVD experts out there? > > > > Kevin Wilks > > Kevin's TV & Video Repair > > Penticton BC Canada > > kevintv@xxxxxxx > > > > > > -------------------------------------------------------------------------- --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > -- > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/