Hello When this relay activates it completes the path between output and the speaker connections, it is functioning normally. This relay will open if you plug in a set of head phones. There is virtually no dc present at the outputs of the ic's. Thanks >Is the 'clicker" the prot relay? Key measurement would be VDC @ each output >,if you can reach there.Otherwise find output before the relay and check DC >level.Expect less than say 30 mV per channel. >Pete >D Trippel <dtrippel@xxxxxxxxxxx> wrote: >Hello Everyone! > >I am working on a mx-d401 mini stereo . The audio outputs were blown. I >replaced both outputs. I have +36 -36 vcc to both ic's and both ic's >have audio at the imput. Relay clicks at turn on, but no output. Any >help would be appreciated. Thanks > >Don Trippel >Don's Elecronics >Rosthern,Sask >Canada > > > >----------------------------------------------------------------------------- >This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ > > >Peter Neal >Neal Electronics >1905 E. Wm.Cannon >Austin,TX 78756 > > > > > > > > > > >----------------------------------------------------------------------------- >This Email List is Public. Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/
