This one is driving me crazy, I have approximately 2 inchs of rastor in center of screen. D422 feeds pin 2 of IC421(LA7841) and is providing 15.80 vdc to pin 2. D421 feeds pins 3 and six I have 37.1vdc on pin 3 and 30.03 on pin 6. Pin 1, .006, pin4, 2.6vdc, pin5, 2.6vdc and pin7, 8.95 vdc. I have checked all the electrolitic caps in the cir with my analyzer and all check good. I have changed the vert IC twice the last time with a known good LA7841. The B+ to pins 3 and 6 seems to high to me but with no prints I am just guessing. Appreciate any help. Terry Terry J Hutchison T&G TV Repair Kingsland GA. sony1@xxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/