[TechAssist] I need training manual
- From: "pete" <tvtech@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 19 Oct 2004 20:33:02 -0500
Hi guys
I have a kv32v15sony tv . Listen to this story? I went to the house hot was
shorted q601,q602, R607,and r608,unit worked fine. cust said it lasted 1 week
everything shorted again. I went back I forgot to resolder the driver
transformer. I replaced all parts and resoldered the driver. I was testing the
high voltage but I put the high voltage lead too close to the ground, because
I had no picture tube and the tv now goes click,click. If the tv is in the off
position when you plug it in the standby voltage at d617 I have steady standby
voltage. When you hit the power button the standby fluctuates from 12 to 17
volts. If I disconnect the horiz output and the b plus from the flyback and
jump the relay the power supply runs, and I get my 135v on pin 2 of the
flyback. As soon as I connect the fly It starts click, click Can anybody out
there help me what else can I do to this set? I have my +15v,-15v,200v,1000v
all are there but I can see no picture or sound when I jump the relay. I also
have high voltage when i jump the relay.
thank you
Pete
Perdomo Tv Inc Since 1972
Miami.Fl
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.776 / Virus Database: 523 - Release Date: 10/12/2004
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
