Thanks Al; That's all I got. Found the problem for no relay click. (Shorted Regulator). Now I have other problems, so I may just abandon it. Thanks. -Ed- > > No other numbers Ed? No Sams on that number. al > > alleathe@xxxxxxxxxxxxx > Al Leatherman > Mine Hill, NJ 07803 > 973-361-5796 > ----- Original Message ----- > From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx> > To: "AAAA TECH-ASSIST" <techassist@xxxxxxxxxxxxx> > Sent: Saturday, January 12, 2002 10:43 AM > Subject: [TechAssist] Hitachi G6NU7 Chassis > > >> >> Would anyone have a partial circuit (Start-UP/Stand-by) for this set. >> The one I'm working on is completely dead, no relay click. Will not come > on >> when relay is shorted. I suspect it will probably need a Flyback, but >> normally I get a relay click on these, even though the flyback may be >> defective. >> >> TIA >> >> -Ed- >> teltek@xxxxxxxxxxx >> TEL-TEK ELECTRONICS. >> >> >> >> >> >> >> ------------------------------------------ >> Make your TechAssist database better! >> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >> ------------------------------------------ >> To UNSUBSCRIBE your email address, click here: >> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> Or send a BLANK email with unsubscribe in the >> SUBJECT field to the address above. >> > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > -- From: Ed Gaidies teltek@xxxxxxxxxxx Tel-Tek Electronics ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.