[TechAssist] Re: ZENITH Z19A11S chassis GA Z line

  • From: Bill Boyd <billstvs@xxxxxxxxxx>
  • To: techassist@xxxxxxxxxxxxx
  • Date: Tue, 15 Jan 2002 17:32:08 -0600

R3211, 10K 1/2W, connects from C3216, 2.2uf 160V, to
L3201 and 3Y3-2

D3209, 103-284A, also connects from C3216 to the other end of L3201

Have zenith manual if you need further help.

HTH
Bill
Bill's TV Service


At 10:35 PM 1/14/02 -0800, you wrote:

>
>I don't have the SAMS 4041 for this tv.
>Zenith z19a11s  chassis ga z line ? Came in with hole
>burned in pc board and burned component. the component
>is a diode or risistor? I can not tell.one end comes
>from the cap.c3216 2.2uf/160v.and goes to L3201 and
>3Y3.Has 99v on 3y3 end -5v? on other.
>  Had vert.line down the middle,(no horiz.)replaced
>cap. and guessed 116 diode?, worked good.then
>had line again?(no horiz.)I don't know if yoke or fly,
>is bad or i am replacing wrong diode.any help
>appreciated.thanks,
>Richard
>
>=====
>Richard Golden
>Golden Video Repair Center
>1214 e. 6th street
>ontario ca. 91764
>(909)988-3356
>
>reldong@xxxxxxxxx

------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: