Thanks Tom, you were right. Somebody mentioned a Capacitor Kit used to repair the comb filter. Any part #'s or cap numbers would help, there's a kajillion caps in there. Thanks, Damon Brunger damon101@xxxxxxxxxxxxxx Telrad Electronic Services Ft Wayne, IN 46815 ----- Original Message ----- From: "hermantv" <hermantv@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 09, 2001 11:41 AM Subject: [TechAssist] Re: Hitachi 60sx1k -AP 14 chassis. Big Pix Bending, poor sync > > Leave the PiP alone...repair the Comb filter. > Tommy Herman...Herman TV > > ----- Original Message ----- > From: <damon101@xxxxxxxxxxxxxx> > To: "TechAssist" <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, October 09, 2001 9:24 AM > Subject: [TechAssist] Hitachi 60sx1k -AP 14 chassis. Big Pix Bending, poor > sync > > > > Hello everyone, > > > > Recently worked on a Hitachi PTV ap14 chassis with darker than normal > picture, no or erratic vertical sync and horizontal bending only at the > bottom 1/3 or top 1/3 (not at the same time). > > > > I tested the sync signal at the vertical output and horiz drive using the > NTSC generator and found that they were locked to the generator. Also tested > the power supply and found about 2 volts of ripple on C952, C957 & C958. > Gonna replace those caps... > > > > I checked the PIP and here is my concern: The small Picture is not present > using video 2 (Pip's main source is only Video 2) and is replaced by a green > field. Video 2 is present on big picture so the failure point must be in the > PIP. The customer doesn't care to have the PIP replaced unless it fixes his > scrambled Big Picture. Has anybody seen the Big Picture lose sync in the > Pip? Yet the horiz/vert outputs are locked to the sync. Slightly weird set > of symptoms, I would have guessed bad sync at the outputs and looked at > power supply, or the video jungle IC for starters. Any help would be > appreciated, I only get 2 or 3 Hitachi units a year. > > > > Thanks in advance, > > Damon Brunger > > damon101@xxxxxxxxxxxxxx > > Telrad Electronic Services > > Ft Wayne, IN 46815 > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.