it's an Hitachi,so resolder every heat sinked component and look also for bad connections at connectors Peggs At 09:11 AM 10/24/05, Larry E wrote: >Hi Guys, went out on this set last friday and installed 3 stk4274`s for >typical convergence failure, found no bad/burnt >resistors so I replaced stk`s set came up perfectly didn`t even have to >touch the "magic focus", customer just called >and said set is now getting very bright, shakes, and has colored retrace >lines from top to bottom, shuts off set for >several hours and set will come on with perfect picture for 5 minutes and >then repeat the problem, going back out >late this afternoon to check it and it`s a 25 mile one way trip, any ideas >? Larry E > >Larry Eastman >American TV & Electronics >Crystal River, Fl. 34428 >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search >engines. Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/