Bill, Did you download the schematic from Hitachi's site? From Tech Repair CD: HITACHI\50UX11K\NO HIGH VOLTAGE-DEAD-RUSHING SOUND ONLY\\\\COLD SOLDER T701\\\\\\\\ HITACHI \50UX11K\No Picture. No Video On Video 1* 2* 3\\\Ap23\Defective Ic-3001\\\\\\\\ HITACHI\50UX11K\NO RASTER-NO SOUND-HAS HIGH VOLTAGE\\\\SOLDER PIN 13 OF IC601\\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "William Rayburn" <premtech@xxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, August 11, 2004 3:11 PM Subject: [TechAssist] Hitachi 50UX11K Have a big screen to do on a service-call that has no raster and from what was described the audio is just white noise and "wave sounding garbage". According to the customer the CRT's do not light up and just before it went out he heard a pop. Suspect possibly IC601 in the vert or a cap supporting it, and possibly comb filter just from some past experience. But the audio has me puzzled. The distance won't make this one easy and I would like to eliminate going out over and over on this repair. Any thoughts and help would be greatly appreciated. Bill William H. Rayburn, CET NESDA Member Premium Technologies PO Box 442 Long Beach, Wa. 98631 (360) 642-4993 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/