[TechAssist] Goldstar GCV1924M TV/VCR - mechanism problem
- From: "Roger G./Mr Fix-It" <rogerfixit@xxxxxxxxxxx>
- To: TECHASSIST <techassist@xxxxxxxxxxxxx>
- Date: Tue, 08 Nov 2005 22:37:18 -0500
Goldstar GCV1924M Combo
Problem- Customer said was playing a tape then stopped. Tape is stuck.
I found unit in full load condition with tape broken and all of it on
take-up reel. Power-on starts takeup reel turning.
Ran load motor (with external power) to eject tape and reset unit.
Reattached to unit expecting it to work BUT - all that happens is takeup
reel turns - power button or eject btns do not function.
Pulled tape transport. Checked alignment; bottom slider; mode switch
sensor circuit board - all looked ok. Load motor is ok - ran it to eject.
--
Roger G.
Mr. Fix-It Harrisburg, PA 17110
WebSite- http://mrfixit.netfirms.com
Alternate - rogerfixit@xxxxxxxx
FAX 510-740-3641; Tel: 717-540-0799 (shop)
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
