[TechAssist] Re: GE vcr model# VG4264
- From: <DAMON101@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 17 Oct 2001 08:51:51 -0500
I am not an expert on VCR's but if your capstan motor utilizes stepper style
of motor the speed is controlled by the micro/speed circuit and also the
servo loop feedback. Either one of these signals would cause the unit to run
at double speed, especially if this has a X2 Play mode.
Damon Brunger
damon101@xxxxxxxxxxxxxx
Telrad Electronic Services
Ft Wayne, IN 46815
----- Original Message -----
From: "Barry Appleby" <burintv@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, October 16, 2001 2:38 PM
Subject: [TechAssist] GE vcr model# VG4264
>
> All functions will operate ok except it goes into fast forward when the
play
> or record buttons are pressed . I cleaned the audio control head , mode
> switch and replaced the end sensors and center led but got no luck . The
> vc93 test tape shows the control pulse is there and doesn't appear to have
a
> servo problem . It doesn't seem to be out of time as it loads and unloads
> ok . The capastan motor is operating at fast forward speed in the play
> position . Does anyone have a suggestion on what I could try next . Thanks
> again . Barry Appleby .
> Burin tv & vcr repair
> burintv@xxxxxxxxxxx
> {709}891-2356
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
