does the bottom look stretched i have a ctc195 doing the same thing al marquardt ampm@xxxxxxx ----- Original Message ----- From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, January 13, 2002 3:09 PM Subject: [TechAssist] GE - 31GT657FM1, Chassis CTC177CC > Content-Type: text/plain; > charset="Windows-1252" > Content-Transfer-Encoding: quoted-printable > > BlankGentlemen, > I'm having an elusive vertical problem with the above described which is = > producing a horizontal line 1/4 of the way down from the top of the = > screen. No schematic on this one, but from past experience it seems my = > in voltage might be low on the vertical deflector U4501. > I've replaced U4501, and about 8 of caps in that circuit, (C-4502, = > 4108, 4107, 4506, 4505, 4705, 4112, 4404) with no change in symptoms. = > My voltage readings on pin 1 and 2 of U4501 are 13.4 and 24.7 = > respectively, and 23.0 on 5-Vout. > I've traced circuit for open shorts with no luck, and quickly running = > out of patience. Any help would be appreciated... > Bill > Premium Technologies > Ocean Park, Washington > > > > > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.