[TechAssist] Re: GE 27GT618 MODEL chassis CTC-187BD
- From: "tvservice" <tvservice@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 29 Sep 2004 13:31:13 -0500
Alvin,
you might try attaching chevron magnets on the back of crt to reduce
impurity or get a roll of craft magnet and cut off strips.
If impurity is very bad you'll need a new crt
Robert
tvservice@xxxxxxxxxxxxx
H & H Electronics Inc
----- Original Message -----
From: "Alvin Rose" <ajroseca@xxxxxxxxxxxxxxx>
To: "techassist" <techassist@xxxxxxxxxxxxxx>
Sent: Saturday, August 28, 2004 8:16 PM
Subject: [TechAssist] GE 27GT618 MODEL chassis CTC-187BD
> Hi Guys
> We have a GE 27GT618 model with a large blue smear in the upper right
> corner..The tv was pulled forward on ita face by a child..I have degaussed
> the screen but it will not remove...The deflection yoke is bonded to the
> picture tube
> can't adjust it..Is there any way to get this set back to normal.
> There is a magnetic band around the tube but does not make much difference
> to the corner purity..Any ideas or suggestions would be appreciated.
> Also wanted to say good luck to TY on his new job..We're going to miss
you..
> Maybe you will come back again to visit the list.
> Alvin Rose
> Radio & Tv Centre
> Box 237,
> Marystown, NL
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
