Clean the mode switch and see if it makes a difference then change it. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Kevin" <kevintv@xxxxxxx> To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, November 26, 2003 3:44 AM Subject: [TechAssist] GE 19TVR60 TV/VCR,TVR2/2A, dead, 6 years old > Customer said that set went dead as the set was on. No tape was in the > VCR. When first powered up, relay clicks on and off, HV for a split > second. Set then goes into shutdown. B+ is 119.4 volts before power > button is pressed, after power button is pressed, B+ drops to 2 volts as > set goes into shutdown. Could not find any shorts or open resistors. > All caps checked good for ESR. TIA > > Kevin Wilks > Kevin's TV & Video Repair > Penticton BC Canada > kevintv@xxxxxxx > > > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/