we've all been in your shoes............ more than once Peggs At 04:54 AM 11/5/05, Gerald Gill wrote: >Finally a FIX on this one. > >I have been struggling with this one since October! >The problem was what appeared to be a convergence problem that only >affected the red and green on the left side had a twist to the problem. >The crosshatch pattern had a split in the gv/gh/rv/rh (never in my life >have I ever come across such a problem). >Alvie from Hitachi worked with me on this one. It's funny the simple >things we over look! I was absolutely convinced I had a convergence >problem and that was shot when we pulled the convergence plugs off the >board and the problem was still there, now what? >Alvie thought it's got to be a horiz drive problem, so I pulled the >board out and on the bench to take a look at it. Guess what I found; a >2cmm chip of glass on the board. >The penny dropped > >Pulled the back off and sure enough the mirror was cracked on the left >side. >Egg in my face, how the heck did I miss that one? >I guess this time of year you're rushed and I really hit a mental block >on this one (it really doesn't help when the customer is calling 3x a >day either). >Thanks to Alvie at Hitachi and Bob Waterman to referring this to Alvie. >I think I let the worst fears get in the way on this one. > >Thanks Guys! > > > >Gerald Gill >Gillco Electronics Inc >113 King St East >Bowmanville, Ont. >Canada >(905)623-9312 > > > >-----Original Message----- >From: Gemini Computer & TV [mailto:geminitv@xxxxxxxxxxx] >Sent: October 4, 2005 7:06 AM >To: Alvie Rodgers C. E. T.; gillcoelectronic@xxxxxxxxxx >Subject: Hitachi PTV Widescreen model# 53UWX10B chassis DP-14G >convergence problem > >Gerald, >I have forwarded this to Alvie Rodgers from Hitachi to see if he can >help >you. > >Bob Waterman, CETR #RI-28 >Master Technician License #9109 >Service Manager / Parts Manager >Gemini Computer, TV, & Security Alarms >(508)695-7302 >(508)695-7769 FAX >geminitv@xxxxxxxxxxx > > >----- Original Message ----- >From: "Gerald Gill" <gillcoelectronic@xxxxxxxxxx> >To: <ServiceTalk@xxxxxxxxxxxxxxxxxxx> >Sent: Monday, October 03, 2005 5:13 PM >Subject: [ServiceTalk] Hitachi PTV Widescreen model# 53UWX10B chassis >DP-14G >convergence problem > > >Hi All, > >Problem: bottom left side convergence is out on the green and red. Note: >weird thing is the red and green are split, more than just a convergence >problem. To explain this a little better the green and red lines on the >left running from top to bottom are fine until it gets just past half >way down the screen then stops (fades out). Then the green/red lines >continue down the screen just to the right. Did that explain it? > >I went into DCAM and copied the old ROM data into memory, still no good. >I changed BOTH STK392-110, and again copied the old ROM data into memory >still no good. All resisters are good. If I go into digital convergence >adjustments I can align the R/G/B but I still have the split lines on >the green/red (double image), so aligning the convergence is no darn >good until I can figure out why the RED and GREEN split like that. >Anyone ever see this problem before (first for me). > >Gerald Gill >Gillco Electronics Inc > > > > > > > > > >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search >engines. Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/