That's what's wrong with mine. If you look at the secondary of the transformer in the box you won't have any power. Should be 5V. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, May 06, 2004 8:18 AM Subject: [TechAssist] Re: F36649 CTC203ca5 need info on comb filter board. > Mine won't detect the EEPROM in the interface box. > Jeff > -- > Intrepid Video TV/VCR Repair > 263 S Front St, Steelton PA 17113 > 717-939-7708; (F) 717-564-4952 > www.intrepid-video.com www.tech-repair.net > ----- Original Message ----- > From: "Gary McCartney" <gary@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, May 05, 2004 6:04 PM > Subject: [TechAssist] Re: F36649 CTC203ca5 need info on comb filter board. > > > Oh great! I've used mine twice and that was a year or more ago. Will > let the group know if it doesn't work next time I use it. What doesn't > work on it? > > > > > Gary McCartney > > McCartney Electronics > Guelph Ontario Canada > Est. 1984 > email: gary (at) number63.ca > > > > > > > Intrepid Video Support wrote: > > > > Al, > > Your chipper checker is down, too? > > I see a lot of that going around. I wonder if RCA put some kind of timer in these to cause them to > > malfunction after a certain amount of time. > > I used mine about 3 times in 6 month and that was it. > > Jeff > > -- > > Intrepid Video TV/VCR Repair > > 263 S Front St, Steelton PA 17113 > > 717-939-7708; (F) 717-564-4952 > > www.intrepid-video.com www.tech-repair.net > > ----- Original Message ----- > > From: "al m" <ampm@xxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Wednesday, May 05, 2004 2:56 PM > > Subject: [TechAssist] F36649 CTC203ca5 need info on comb filter board. > > > > I need the voltages on the comb filter board. I changed U26901 the only IC > > on this board and still have nothing coming out. If I put a video signal on > > pin 2 of the glass comb filter I get video.the voltages don't correspond > > with the print Jeff sent me ( I'd like to thank him again) What I need is > > someone to send me a comb filter FL12601 to try before I go spending $20 and > > find out it's OK too. My chipper checker is down and I replaced the micro I > > just wonder if I need to program the micro or what . LOST ON THIS ONE. > > Thanks. > > Al Marquardt > > ampm@xxxxxxx > > Al Marquardt Electronic Repair > > 206 W Main > > Girardville Pa. 17935 > > > > -------------------------------------------------------------------------- --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > -- > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/