I have a Daytek 17" flat CRT monitor model 755DF which has a focus problem. When first looked at it, the focus was out a fair amount. I adjusted focus 1 pot on the flyback but it only seems to focus vetically. Then I adjusted focus 2 pot at the bottom of the flyback (which is normally "screen" on most flybacks), and the focus adjusted horizontally. I was able to bring the focus near to correct but the bottom pot is all the way to the one side now. I need a bit more adjustment. Is my problem a bad focus divider in the flyback, or is there a resistor in the circuit that could have changed in value causing my out of range? -- Gary McCartney McCartney Electronics Guelph Ontario Canada Est. 1984 email: gary (at) number63.ca ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/