[TechAssist] Computer Display Driver Question
- From: pwblakeman@xxxxxxxx
- To: techassist@xxxxxxxxxxxxx
- Date: Sat, 11 May 2002 23:11:59 -0700
This is my computer that I use for my shop. It is an Acer Aspire 200mhz
Pentium. I replaced the old 4 gig hard drive with a 40 gig. I got
everything working except the display. I am using the same driver as with
the old hard drive
but when I boot it defaults to the 640 x 480 16 bit color. When I try to
change the settings it says there is a problem with the display adapter
or driver. I know
the hardware is ok because if I go back to the old hard drive it works
fine with all the settings. The only thing different about this
installation is that the old hard drive originally had windows 95. I had
upgraded to win 98 and it still worked fine. On the new hard drive I
loaded only win 98. Is there something this display
driver needs from win 95? The display driver is an ATI mach64 on board
type...
Thanks for any help on this.
Peter Blakeman
Blakeman Electronics
Tyler, Tx
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
